The NOKOXIN MTP/MPO trunk cables are a kind of MPO cable assembly with two or more 12-fiber MTP/MPO connectors on each end, typically used for inter building and intra building backbone cabling runs where cable distances are predictable. The NOKOXIN trunk cables are fully configurable, available with a variety of cable and connector combinations, including connector type, breakout configurations and jacket material. With highly integrated design and manufacturing capability, NOKOXIN provides customized MTP/MPO trunk cables which are 100% tested to deliver optimal performance and reliability.
Features
▪ With 12-fiber and 24-fiber MPO/MTP connector standard
▪ Available in OS1/2, OM2, OM3 and OM4
▪ Available in FC,LC, SC, ST, MU, and MTP
▪ Interface polished type has PC, UPC and APC
▪ Available in 12 / 24 / 36 / 48 / 72 / 96 / 144-fibers
▪ 100% factory tested
▪ Discrete connectors are heat-cured and use ceramic ferrules and sleeves
▪ Fan-out fibers from MPO/MTP connectors into individual simplex or duplex
▪ Customized for length, staggering, connector type, breakout style, fiber count, and labeling fiber
Applications
▪ Data Center Interconnect ▪ High-Density Fiber Management ▪ Telecommunication Networks ▪ Broadband/CATV Networks ▪ LAN/WAN Premises
MPO/MTP Termination |
Type |
Single mode(APC polish) |
Multi mode(PC polish) |
Fiber count |
8,12,24,etc. |
8,12,24,etc. |
Fiber type |
G652D,G657A1 etc. |
OM1,OM2,OM3,OM4 etc. |
Maximum Insertion Loss |
Standard |
Elite Low Loss |
Standard |
Elite Low Loss |
≤0.75dB |
≤0.35dB |
≤0.75dB |
≤0.35dB |
Return Loss |
≥55dB |
N/A |
Working Temperature |
-40℃~80℃ |
-40℃~80℃ |
Test Wavelength |
1310nm |
850nm |
Generic Connector Termination |
Type |
Single mode |
Multimode |
UPC |
APC |
PC |
Max,Insertion Loss |
≤0.3dB |
≤0.3dB |
≤0.3dB |
Typical Insertion Loss |
0.2dB |
0.2dB |
0.2dB |
Return Loss |
≥55dB |
≥65dB |
≥25dB |
Working Temperature |
-40℃~80℃ |
Test Wavelength |
1310nm |
850nm |
All MM SM shall be tested for IL |
Pre-terminated MPO/MTP Technology-Polarity
The three polarity methods Type A, Type B and Type C are used to guarantee the right bi-directional allocation.
|